Optomec Receives $1.5M Air Force Contract for Additive Repair of F35 Large Titanium Blisks

The Optomec Additive Manufacturing system, projected to reduce Titanium blisk repair costs by 80%. (Photo: Business Wire)

The Optomec Additive Manufacturing system, projected to reduce Titanium blisk repair costs by 80%. (Photo: Business Wire)


The US Air Force has awarded Optomec a $1.5 million contract to develop a Metal Additive Manufacturing system and process that enables the repair of oversized titanium components used in aircraft engines. The initial target, called integrally bladed rotors (IBRs, aka “blisks”), are complex, single-piece compressor rotors made of light-weight titanium alloy that are routinely worn or damaged in normal use and can cost more than $500,000 each to replace with a newly made part.

More from the News 

The implementation of an Additive Repair process for these parts is projected to result in greater than 80% in cost savings, which could save the Air Force tens of millions of dollars per year in maintenance costs as well shorten the supply chain for these critical components, used on aircraft such as the F22 Raptor and F35 Lightning II. Optomec’s solution will also benefit the broader commercial aviation market as engine OEMs continue to integrate larger, complex titanium components into their latest, fuel-efficient designs.

Solution has potential to Reduce Costs by 80% and Save $10s of Millions Annually.

The contract deliverables include the commissioning of a large format 5-axis LENS/DED metal printer with a work envelope of 1500 x 1500 x 1000 mm (5 x 5 x 3 ft), capable of handling IBR/Blisks up to 46” in diameter. The system will be equipped with a proprietary gas purification system that maintains an oxygen and moisture free environment (<10ppm), which is necessary to ensure superior metallurgical and mechanical properties when depositing titanium, especially for flight critical componentry. Additionally, the project will investigate the efficacy of various process monitoring techniques that track key variables as a validation and quality assurance measure.

Most notably, the project will employ the capabilities above to develop and demonstrate viable repairs for large blisks, including restoration of both representative wear and foreign object damage (FOD) across critical areas of the individual blades. In a final step, Optomec will repair various sections of a large scale blisk for evaluation in a spin pit test as an initial step on the path to qualification.

Optomec’s Additive Manufacturing (AM) repair processes are currently used in high volume production for other turbine engine parts worldwide, having repaired more than 10 million components over the last 20 years. This project will scale-up Optomec’s solution for use on larger parts, with diameters greater than 1m. In addition, Optomec will integrate its oxygen-free processing solution for titanium alloys–a key capability for defect-free, high-strength titanium processing.

“As OEMs lightweight and simplify their commercial and military aircraft engine designs, the industry is faced with larger, more complex titanium parts to maintain on the MRO side.” said Jamie Hanson, Optomec’s VP of Business Development, “Optomec is best positioned to deliver production solutions to this growing need, based on its proprietary machine, software and process capabilities, combined with its existing position as the market leader delivering machines for production repair of individual turbine blades. There’s no question that this project with the Air Force will benefit the broader aerospace market significantly over the next ten years.”

AM Chronicle Journal Issue 3

Optomec’s LENS Metal Additive Manufacturing machines use a process called Directed Energy Deposition (DED) to build 3D metal parts by depositing powdered metal into a precisely controlled pool of melted metal. Fiberoptic lasers supply the thermal power while advanced motion control systems manipulate the deposition system and part to produce the required geometries. Optomec leads the DED market with more than 250 machines in use, including approximately 100 industrial printers used for production repair of turbomachinery used in aircraft and energy applications.

Optomec is a profitable, privately-held, rapidly growing supplier of Additive Manufacturing systems. Optomec’s patented Aerosol Jet Systems for printed electronics, and LENS and Huffman brand 3D Printers for metal component production and repair, are used by industry to reduce product cost and improve performance. Together, these unique printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has delivered more than 600 of its proprietary Additive Manufacturing systems to more than 200 marquee customers around the world, for production applications in the electronics, energy, life sciences and aerospace industries. Our users include countless blue-chip manufacturing companies, such as GE, Samsung, Raytheon, Siemens, Lockheed and LiteOn, as well as the US Air Force, US Navy, US Army and NASA. For more information, visit optomec.com.

LENS is a registered trademark of Sandia National LabsAerosol Jet is a registered trademark of Optomec, Inc.

Subscribe to AM Chronicle Newsletter to stay connected:  https://bit.ly/3fBZ1mP 

Follow us on LinkedIn: https://bit.ly/3IjhrFq 

Visit for more interesting content on additive manufacturing: https://amchronicle.com/

Original Source

You May Also Like

Related Content

About the Author

Author Profile