Close Menu
AM ChronicleAM Chronicle
  • Content
    • News
    • Insights
    • Case Studies
    • AM Infocast
  • Focus Regions
    • India
    • Asia Pacific
    • Middle East
    • North America
    • Europe
  • Industries
    • Automotive
    • Aerospace
    • Defence
    • Energy
    • Construction
    • Healthcare
    • Tooling
    • Engineering
  • Training
  • Magazine
    • Digital Issues
    • Print Subscription
  • Events
Facebook Instagram YouTube LinkedIn
  • About us
  • Media Kit
  • Contact us
Facebook Instagram YouTube LinkedIn
AM ChronicleAM Chronicle
  • Content
    1. News
    2. Insights
    3. Case Studies
    4. AM Infocast
    5. View All
    Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications, Credits: Velo3d

    Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications

    June 5, 2025
    Novel Magnetic 3D-Printed Pen

    Novel Magnetic 3D-Printed Pen Can be A Promising Diagnostic Tool for Early-Stage Parkinson’s Disease

    June 3, 2025
    Caption:Researchers have developed a resin that turns into two different kinds of solids, depending on the type of light that shines on it: Ultraviolet light cures the resin into a highly resilient solid, while visible light turns the same resin into a solid that is easily dissolvable in certain solvents. Credits:Credit: Courtesy of the researchers; MIT News

    New 3D printing method by MIT enables complex designs and creates less waste

    June 3, 2025
    NAMI Partners with Ministry to Launch Saudi Arabia’s Advanced Manufacturing Centre

    NAMI Partners with Ministry to Launch Saudi Arabia’s Advanced Manufacturing Centre

    May 30, 2025
    Revopoint Trackit Now on Kickstarter: Marker-free 3D Scans Within Everyone's Reach!

    Revopoint Trackit Now on Kickstarter: Marker-free 3D Scans Within Everyone’s Reach!

    May 28, 2025
    Credits: Outokumpu

    Outokumpu launches stainless steel metal powder in additive manufacturing for aerospace and aviation industry applications

    May 22, 2025
    Why Bioprinting Innovations can elevate healthcare and industrial AM

    Why Bioprinting Innovations can elevate healthcare and industrial AM

    May 21, 2025
    Why Additive Manufacturing Excels in Some Applications but Fails in Others?

    Why Additive Manufacturing Excels in Some Applications but Fails in Others?

    May 21, 2025
    Formlabs fuse 1+

    How Imaginarium Helped Kaash Studio Scale with the Right 3D Printing Technology

    April 12, 2025
    The Formlabs Fuse 1+ 30W

    Kaash Studio Optimized Service Bureau Operations with Formlabs 3D Printers- Case Study

    January 30, 2025
    Namthaja Unveils Worlds First 3D Printed Marine Gangway

    Worlds First 3D Printed Marine Gangway unveiled by Namthaja

    August 8, 2024
    RusselSmith Material Performance Improvement Whitepaper

    RusselSmith Whitepaper : Improving Material Performance with Microstructural Refinement

    May 9, 2024
    Sustainable Production of Metal Powder for Additive Manufacturing

    Sustainable Production of Metal Powder for Additive Manufacturing with Bruce Bradshaw

    February 15, 2024
    Meeting Evolving Customer Demands in the Additive Manufacturing Industry with Tyler Reid

    Meeting Evolving Customer Demands in the Additive Manufacturing Industry with Tyler Reid

    February 9, 2024
    Innovation is at the heart of AMUG with Diana Kalisz

    Innovation is at the heart of AMUG with Diana Kalisz

    March 7, 2023
    3D Printing Workshops at AMUG with Edward Graham

    3D Printing Workshops at AMUG with Edward Graham

    March 7, 2023
    Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications, Credits: Velo3d

    Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications

    June 5, 2025
    New 3D Printing Technology Enables Dual-Material Creation from Single Resin

    New 3D Printing Technology Enables Dual-Material Creation from Single Resin

    June 5, 2025
    Novel Magnetic 3D-Printed Pen

    Novel Magnetic 3D-Printed Pen Can be A Promising Diagnostic Tool for Early-Stage Parkinson’s Disease

    June 3, 2025
    Caption:Researchers have developed a resin that turns into two different kinds of solids, depending on the type of light that shines on it: Ultraviolet light cures the resin into a highly resilient solid, while visible light turns the same resin into a solid that is easily dissolvable in certain solvents. Credits:Credit: Courtesy of the researchers; MIT News

    New 3D printing method by MIT enables complex designs and creates less waste

    June 3, 2025
  • Focus Regions
    • India
    • Asia Pacific
    • Middle East
    • North America
    • Europe
  • Industries
    • Automotive
    • Aerospace
    • Defence
    • Energy
    • Construction
    • Healthcare
    • Tooling
    • Engineering
  • Training
  • Magazine
    • Digital Issues
    • Print Subscription
  • Events
Subscribe
AM ChronicleAM Chronicle
Home » News

HBD Metal 3D Printer Closed $60 Million Series A Financing

News By AM Chronicle EditorFebruary 8, 20229 Mins Read
HBD Metal 3D Printing Building
LinkedIn Twitter Facebook WhatsApp Pinterest Email Copy Link

HBD Metal 3D Printer, a leader in the metal additive manufacturing industry, announced that it has recently closed $60 million Series A financing, the largest first-ever funding round of its kind. This round of financing was led by Qianhai FOF, co-invested by Grand Flight Investment and CITIC Securities Investment, and Winsoul Capital served as the exclusive financial advisor.

More form the News 

HBD, headquartered in China, is a leading metal 3D printing enterprise. It has overall technical solutions for equipment, software, materials, printing processes, etc., covering aerospace, industrial, medical and various fields, and its industry coverage and market share are in the forefront. By the end of 2021, HBD had delivered more than five hundred metal 3D printing systems in total, which were sold to over twenty countries and regions around the world, ranking among the top in sales.

The core team of HBD has nearly 20 years of experience in laser and metal additive production, of which R&D personnel account for over half of the company’s total number of people, and the R&D investment is as high as millions of US dollars every year. At present, the company has beyond 200 patents, including three international patents, and the number of core technology patents for metal 3D printing systems is industry-leading. In addition, as a main drafter, HBD participated in the formulation of fourteen standards such as national standards and industry standards, and took part in the construction and standard formulation of China’s 3D printing evaluation system.

As the first in the world, HBD pioneered the LACM – Laser Additive & Cutting Manufacturing hybrid processing technology, which solves the world-class problem of finishing the inner surface of 3D printed metal parts.

While breaking through the technical bottleneck of products, in order to ensure product quality and service quality, HBD has gradually completed the construction of automated production lines and factories. HBD is highly valued by the Shanghai Lingang New Area Government, and acquired nearly 6.5 acres of land in 2021, planning to build a new R&D and production base. The base will have a built-up area of nearly 60,000 square meters, adjacent to well-known companies such as Tesla Gigafactory 3. With the completion of this financing, HBD will continue to invest in high-tech R&D, technical team building and high-end manufacturing.

HBD building

HBD Metal 3D Printing Building
Schematic Diagram of the HBD Metal 3D Printer New Production Base in Shanghai

Today, HBD has successfully developed a total of 23 models of large, medium and small machines. The product matrix is complete. HBD cooperates and serves thousands of customers, including CISRI, WeNext, United Imaging, Fosun, Gree, Matsui, Sunshine Laser & Technology and other industry leaders.

At the same time, HBD takes intelligence, automation and digitalization as the starting point to provide enterprise-level integrated high-quality metal 3D printing solutions of “intelligent production line + batch manufacturing + industrial intelligent IoT”, providing customers with more efficient and more flexible new business forms of cooperation.

Product Evolution of HBD Metal 3D Printer

Product Evolution of HBD Metal 3D Printer

As a high-tech-intensive industry, the innovation and development of aerospace is a comprehensive reflection of a country’s manufacturing strength and the modernization level of the defense industry. HBD has been recognized by industry users for its outstanding laser beam quality, optimized air duct structure design, stable and reliable printing accuracy, excellent printing structure design and process development. Multi-laser metal 3D printers such as HBD-1000 and HBD-1500 have been successfully developed and installed in batches. These large-scale equipment have solved many pain points in aerospace manufacturing, and have been stably supplied to numerous top scientific research institutes and aerospace companies in batches.

The nuclear reactor heat exchanger 3D printed by HBD for the nuclear power plant caused a sensation. It changes the traditional heat exchanger from a height of exceeding ten meters to a height of merely 400mm, which not only reduces the volume and weight, but also achieves an amazing order of magnitude optimization in terms of energy efficiency, production cycle and cost. It brings new possibilities for the future aerospace and green energy industries.

Comparison Diagram
Comparison Diagram of Traditional and 3D Printed Nuclear Reactor Heat Exchanger

In the industrial field, non-standard parts, alternative manufacturing of precision castings, and mold parts have been rapidly applied and promoted. Using metal 3D printing technology to make the mold with conformal cooling channels, which are closer to the surface of the mold that needs to be cooled, can shorten the production cycle and improve production efficiency. In the field of mold & die applications, HBD has reached cooperation with many well-known companies in the mold making industry to jointly create comprehensive solutions for metal 3D printing. HBD deeply integrates the software, hardware, process and material technology of the equipment to ensure the quality and efficiency of the 3D printed parts.

The demand for customization in the medical field is extremely high, and it is one of the industries that is very suitable for 3D printing. As a leader in the medical & dental field in the early years, HBD has seen the market potential of orthopedic implants with great foresight, and has cooperated with a number of academicians and professors to study the application of metal 3D printing in orthopedic implants. As early as in 2015, the first HBD-metal-3D-printed personalized bone plate implantation operation was successfully completed in cooperation with a team of a professor from Southern Medical University.

Mr. Jianye LIU, founder and CEO of HBD, said: “Compared to the machine tool subtractive manufacturing system, as a subversive additive manufacturing system, metal 3D printing is rapidly maturing, and will become a new technology comparable to traditional machine tool processing and production methods in the future. The current mainstream aerospace, industrial, medical, mold and other fields, and other industries will also be more applied to metal 3D printing technology, giving birth to trillion-level market opportunities. With the spirit of “metal 3D printing craftsman”, HBD strives to improve the team, management, products and services, forms a back-to-back mutual trust cooperation relationship with upstream and downstream partners, and adheres to the principle of providing core competitiveness for partners in the long term. HBD is confident that it will do better in the future. While growing rapidly, HBD will also promote the faster and better development of the entire Chinese metal 3D printing industry.”

AM Chronicle Journal Issue 3

Xuan XI, Executive Director of Qianhai FOF and Executive President of Smart Internet Industry Fund, said: “With the reduction of industrial chain costs and the improvement of technological maturity, metal 3D printing has gradually transformed from prototype manufacturing to mass production. More and more industries are adopting the metal 3D printing applications. We are optimistic about the development of metal 3D printing in China and the world. The HBD team has been deeply involved in the industry for many years, with high technical sensitivity and practical spirit, and I believe that under the leadership of Mr. Jianye Liu, we will move towards a more brilliant future. The Qianhai Ark Fund Group is willing to continue to accompany the company, graft more industrial and political and business resources for HBD, and help the company develop more rapidly.”

Yun PEI, Executive Director of Grand Flight Investment, said: “In the deterministic track of 3D printing technology, with the gradual maturity of the previous generation of 3D printing companies mainly based on resin, nylon and other polymer materials, we have seen the rapid rise of metal 3D printing, which is represented by selective laser melting technology. Coupled with the substantial increase in the development of metal powder, it is truly geared to large-scale industrial manufacturing. At present, the 3D printing needs especially in the specific large industries, such as aerospace, and professional large markets, industrial molds alike, are being accelerated by metal 3D printing. Among them, we believe that the development mode of leading products and then leading services represented by HBD has high value content and long-term competitiveness. Grand Flight Investment will also make full use of the strong financial + industrial background of Far East Horizon Group to help HBD accelerate its breakthrough to the next stage of development.”

Xiaolu ZHUANG, Investment Director of CITIC Securities, said: “As a benchmarking company in the field of metal 3D printing, while HBD has achieved world-leading performance in some core technologies, its business has also grown rapidly. It has taken the lead in obtaining unanimous acknowledgment from downstream leading customers in aerospace, industrial, medical and other industries. The HBD team has the craftsmanship spirit that combines diligence, pragmatism and hard study. We are very happy to be able to walk hand in hand with the HBD team, and will also provide further assistance to the company in terms of capital planning and other aspects. ”

Zhilong FU, Partner of WinSoul Capital and Head of the AI/Intelligent Manufacturing Group, said: ” WinSoul Capital continues to pay attention to the upgrading of China’s high-end manufacturing industry, and has also made key layouts in this direction. With the development of Industry 4.0, 3D printing technology has made great breakthroughs in core indicators such as efficiency and accuracy. Its application in many industries represented by aerospace, high-end industry and medical care has become increasingly normalized, giving birth to huge incremental market opportunities. As a senior enterprise rooted in metal additive manufacturing, HBD is committed to leading the industry to achieve breakthroughs in technological bottlenecks, also actively cooperate with upstream and downstream ecological partners in a flexible business model to expand new ideas for industry development and accelerate the large-scale application of metal 3D printing technology. We have seen HBD’s determination to pursue innovation, and we also expect HBD to reach a higher level under the leadership of Mr. Jianye LIU and the support of shareholders, leading China’s metal 3D printing technology to the world stage. WinSoul Capital will accompany HBD to grow together and help HBD become a new generation of metal 3D printing leader.”

Subscribe to AM Chronicle Newsletter to stay connected:  https://bit.ly/3fBZ1mP 

Follow us on LinkedIn: https://bit.ly/3IjhrFq 

Visit for more interesting content on additive manufacturing: https://amchronicle.com/

Original Source

Company Website 

3D metal printing 3d printing additive manufacturing china hbd
AM Chronicle Editorial Team

The AM Chronicle Editorial Team is a collective of passionate individuals committed to delivering insightful, accurate and engaging stories to additive manufacturing audiences worldwide.

LATEST FROM AM
Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications, Credits: Velo3d News

Velo3D enters CRADA with NAVAIR to Advance Additive Manufacturing for Aerospace and Defense Applications

June 5, 20252 Mins Read
New 3D Printing Technology Enables Dual-Material Creation from Single Resin Uncategorized

New 3D Printing Technology Enables Dual-Material Creation from Single Resin

June 5, 20251 Min Read
Novel Magnetic 3D-Printed Pen News

Novel Magnetic 3D-Printed Pen Can be A Promising Diagnostic Tool for Early-Stage Parkinson’s Disease

June 3, 20253 Mins Read

CONNECT WITH US

  • 126 A, Dhuruwadi, A. V. Nagvekar Marg, Prabhadevi, Mumbai 400025
  • [email protected]
  • +91 022 24306319
Facebook Instagram YouTube LinkedIn

Newsletter

Subscribe to the AM Chronicle mailer to receive latest tech updates and insights from global industry experts.

SUBSCRIBE NOW

Quick Links

  • News
  • Insights
  • Case Studies
  • AM Training
  • AM Infocast
  • AM Magazine
  • Events

Media

  • Advertise with us
  • Sponsored Articles
  • Media Kit

Events

  • AM Conclave 2025
    24-25 September 2025 | ADNEC, Abu Dhabi
  • AMTECH 2025
    3-4 December 2025 | KTPO, Whitefield, Bengaluru
CNT Expositions & Services LLP
© 2025 CNT Expositions & Services LLP.
  • Privacy Policy
  • Cookie Policy

Type above and press Enter to search. Press Esc to cancel.



0 / 75